Skip to content
Contact us +1.905.238.1500
en
CAD
Skip to product information
Description

The Traction Table Harness is contoured to fit comfortably under the rib cage of both female and male patients, but more importantly, both the thoracic and lumbar wraps are made from a nonslip material that ensures the belts stays in place over clothing.

The RB Traction Pillow protects your table from unnecessary wear and tear, and raises the patient's shoulders while supporting the lower cervical area. This pillow increases the overall comfort for patients during traction treatment.

The Traction Table Knee Bolster Set is a durable aid for clinical or home use. Featuring independent bolsters to support each leg, this set is a fully functional, easy to use accessory.

 

Belt-Style Harness

Product Size:

+ Fits 24"-60" Waist

    Product Weight: 3.5 lbs

      Color: Black

      Latex: This product is not made with natural rubber latex

      Product Origin: Made in USA

      Knee Bolster Set

      Product Size: 11.5" x 9.5" x 7.5"

        Product Weight: 2 lbs

          Color: Black

          Latex: This product is not made with natural rubber latex

          Product Origin: Made in USA

          Traction Pillow

          Product Size: 12" x 14" x 4"

          Product Weight: 0.95 lbs

          Color: Black

          Latex: This product is not made with natural rubber latex

          Product Origin: Made in USA

          Instructions of Use


          Used in conjunction with a mechanical traction table to provide traction to patient. 
          1. Place belt on traction table with sewn red stripe facing up. Place the thoracic belt (black square hook) over non-traction device end of table. Pelvic belt should be placed at the traction table separation point. Align red dots on pelvic and thoracic belts to ensure proper alignment. 
          2. When lying supine on the belt, the patient's iliac crest should line up approximately one inch below the sewn red stripe. 
          3. Secure the outer pelvic belt snugly around the hips. Connect the 2 strap by snapping the quick release buckle. Tighten as necessary by pulling the strap. 
          4. For finer tension adjustment, simply lift the excess strap beyond the buckle and pull down and away with the excess strapping. 
          5. Close the thoracic belt around patient. Placing the belt toward the hips but under the rib cage. Normally the o-ring, by the quick release buckle, will be covered by the thoracic belt. 
          6. Hook the swivel buckle to the center metal o-ring on pelvic belt. 
          7. Proceed with traction treatment.

          Traction Table Accessory Kit

          Regular price $528.95

          MEDI-TRC-4998

          The Traction Table Harness is contoured to fit comfortably under the rib cage of both female and male patients, but more importantly, both the thoracic and lumbar wraps are made from a nonslip material that ensures the belts stays in place over clothing.

          The RB Traction Pillow protects your table from unnecessary wear and tear, and raises the patient's shoulders while supporting the lower cervical area. This pillow increases the overall comfort for patients during traction treatment.

          The Traction Table Knee Bolster Set is a durable aid for clinical or home use. Featuring independent bolsters to support each leg, this set is a fully functional, easy to use accessory.

           

          Belt-Style Harness

          Product Size:

          + Fits 24"-60" Waist

            Product Weight: 3.5 lbs

              Color: Black

              Latex: This product is not made with natural rubber latex

              Product Origin: Made in USA

              Knee Bolster Set

              Product Size: 11.5" x 9.5" x 7.5"

                Product Weight: 2 lbs

                  Color: Black

                  Latex: This product is not made with natural rubber latex

                  Product Origin: Made in USA

                  Traction Pillow

                  Product Size: 12" x 14" x 4"

                  Product Weight: 0.95 lbs

                  Color: Black

                  Latex: This product is not made with natural rubber latex

                  Product Origin: Made in USA

                  Instructions of Use


                  Used in conjunction with a mechanical traction table to provide traction to patient. 
                  1. Place belt on traction table with sewn red stripe facing up. Place the thoracic belt (black square hook) over non-traction device end of table. Pelvic belt should be placed at the traction table separation point. Align red dots on pelvic and thoracic belts to ensure proper alignment. 
                  2. When lying supine on the belt, the patient's iliac crest should line up approximately one inch below the sewn red stripe. 
                  3. Secure the outer pelvic belt snugly around the hips. Connect the 2 strap by snapping the quick release buckle. Tighten as necessary by pulling the strap. 
                  4. For finer tension adjustment, simply lift the excess strap beyond the buckle and pull down and away with the excess strapping. 
                  5. Close the thoracic belt around patient. Placing the belt toward the hips but under the rib cage. Normally the o-ring, by the quick release buckle, will be covered by the thoracic belt. 
                  6. Hook the swivel buckle to the center metal o-ring on pelvic belt. 
                  7. Proceed with traction treatment.

                  There is currently no content in this section. Use the sidebar to add material to this section.

                  Free Shipping over $100*

                  *Condition Apply

                  Offer Price Match

                  We can match Prices and offer discounts if possible*

                  One Stop Shop

                  We carry almost everything for any rehabilitation Centre

                  Secured Site

                  No need to remember your password

                  Drawer Title
                  Similar Products